STIXX 3-80

The SANlight STIXX 3-80 has three modules and is specially optimised for 80 cm deep growing areas. It provides very even light distribution and is suitable for both home grow tents and professional vertical growing systems.

Like all models in the STIXX series: IP68, 90/135° optics, full spectrum LED, maximum homogeneity. Ideal for 80×80 tents, cutting zones, vegetation rooms and multi-layer systems.

STIXX Smart Driver Technologie

The right driver for the right luminaire

The STIXX series is powered by a modular driver concept. By combining drivers and LED modules, you can influence both the maximum system performance and the efficiency of your installation – and thus adapt it to almost any application.

If the maximum output power of the driver is equal to or greater than the total power of all connected LED modules, each LED module automatically operates at its rated power. If, for example, an LED module is removed, the driver detects this immediately and adjusts the output power accordingly so that no LED module is overloaded. If the total power of all connected modules exceeds the maximum output power of the driver, this is distributed accordingly and the LED modules operate at a correspondingly reduced power. This increases system efficiency. By choosing a suitable driver/LED module combination, you can directly influence the output power per LED module and the system efficiency. The table shows the possible driver/LED module combinations and the corresponding output power of the LED modules.

ATTENTION: Only identical STIXX LED modules from the same model series may be supplied together via one driver. It is not permissible, for example, to connect STIXX 2-60 and STIXX 3-80 to a common driver. All permissible driver/LED module combinations can be found in the table.