



Item No.: AA5130
Highly efficient LED plant lighting system for indoor applications.
€126,12
19 in stock
NoticeThe Undercanopy STIXX 4-100 consists of four modules and is ideal for plant stocks with a depth of 100 cm. It improves light penetration, prevents shadow zones and increases flower quality in the lower area.
Equipped with IP68, 90/135° beam angle and full spectrum LED, it is ideal for intercanopy lighting, vertical farming and larger home grows.
Undercanopy stand included in delivery.
| Undercanopy STIXX 4-100 | |
|---|---|
| Power consumption | 94 |
| PPF* | 254 |
| Weight | 1,35 |
| Length (mm) | 896 |
| Width (mm) | 85 |
| Height (mm) | 16.9 |

The STIXX series is powered by a modular driver concept. By combining drivers and LED modules, you can influence both the maximum system performance and the efficiency of your installation – and thus adapt it to almost any application.
If the maximum output power of the driver is equal to or greater than the total power of all connected LED modules, each LED module automatically operates at its rated power. If, for example, an LED module is removed, the driver detects this immediately and adjusts the output power accordingly so that no LED module is overloaded. If the total power of all connected modules exceeds the maximum output power of the driver, this is distributed accordingly and the LED modules operate at a correspondingly reduced power. This increases system efficiency. By choosing a suitable driver/LED module combination, you can directly influence the output power per LED module and the system efficiency. The table shows the possible driver/LED module combinations and the corresponding output power of the LED modules.
ATTENTION: Only identical STIXX LED modules from the same model series may be supplied together via one driver. It is not permissible, for example, to connect STIXX 2-60 and STIXX 3-80 to a common driver. All permissible driver/LED module combinations can be found in the table.
AC connection cable for Q-Series Gen1 with EU plug.
€12,00 / Piece Notice Learn more Zum Händler Zum WarenkorbExtension cable to Q-Series Gen1 “Daisy Chain”, 37cm long
€12,00 / Piece Notice Learn more Zum Händler Zum WarenkorbAC T connector plug for Q-Series Gen1 is required to connect 2 Q-Series Gen1 chandeliers in series and power them…
€4,80 / Piece Notice Learn more Zum Händler Zum WarenkorbSuspension bracket for SANlight S-Series S4w & S2w
€2,40 / Piece Notice Learn more Zum Händler Zum WarenkorbS4W LED driver complete with mounted AC and DC plug EU.
€69,60 / Piece Notice Learn more Zum Händler Zum WarenkorbClamp suitable for the M30 series.
€2,40 / Piece Notice Learn more Zum Händler Zum WarenkorbS2W Led driver complete with mounted AC and DC plug EU.
€61,20 / Piece Notice Learn more Zum Händler Zum WarenkorbPower supply suitable for the M30, cable included.
€49,20 / Piece Notice Learn more Zum Händler Zum WarenkorbMagnetic key suitable for all SANlight M-Dimmers
€5,40 / Piece Notice Learn more Zum Händler Zum WarenkorbMagnetic key suitable for all SANlight BT-Dimmers
€5,40 / Piece Notice Learn more Zum Händler Zum WarenkorbWieland latch gray, suitable for Q-series Gen2 and EVO-series
€0,60 / Piece Notice Learn more Zum Händler Zum WarenkorbWieland sealing piece for the EVO-Series and Q-series.
€2,04 / Piece Notice Learn more Zum Händler Zum Warenkorb