Undercanopy STIXX 6-150

The Undercanopy STIXX 6-150 consists of six modules and offers maximum coverage at a depth of 150 cm. It increases yield, morphology and light penetration in very large plant structures.

With IP68, 90/135° optics, full spectrum LED and modular functionality, it is ideal for interlighting in large canopies, vertical farming, production facilities and yield enhancement in the lower plant area.

Undercanopy stand included in delivery.

Die SANlight STIXX 6-150 besteht aus sechs Modulen und ist für eine Tiefe von 150 cm konzipiert. Sie bietet maximale Länge, Homogenität und höchste Effizienz für große Flächen.

Dank IP68 Schutz, Full Spectrum LED, 90/135° Abstrahlwinkel und extrem flacher Bauweise ist sie ideal für große Canopys, vertical farming racks, Veg und Mutterpflanzen, sowie Anlagen mit geringer Höhe.

STIXX Smart Driver Technologie

The right driver for the right luminaire

The STIXX series is powered by a modular driver concept. By combining drivers and LED modules, you can influence both the maximum system performance and the efficiency of your installation – and thus adapt it to almost any application.

If the maximum output power of the driver is equal to or greater than the total power of all connected LED modules, each LED module automatically operates at its rated power. If, for example, an LED module is removed, the driver detects this immediately and adjusts the output power accordingly so that no LED module is overloaded. If the total power of all connected modules exceeds the maximum output power of the driver, this is distributed accordingly and the LED modules operate at a correspondingly reduced power. This increases system efficiency. By choosing a suitable driver/LED module combination, you can directly influence the output power per LED module and the system efficiency. The table shows the possible driver/LED module combinations and the corresponding output power of the LED modules.

ATTENTION: Only identical STIXX LED modules from the same model series may be supplied together via one driver. It is not permissible, for example, to connect STIXX 2-60 and STIXX 3-80 to a common driver. All permissible driver/LED module combinations can be found in the table.