Most LED luminaires on the market have very high inrush currents of up to 80A. Although these inrush currents only occur for a very short time, they can cause the circuit breaker to trip. This severely limits the maximum number of luminaires that can be supplied via a socket.
The SANlight inrush current limiter solves this problem and can be used with all SANlight luminaires Plug & Play. This inrush current limiter can also be used for luminaires from other manufacturers, provided the plug connections (Wieland RST20i3) fit. When installing the inrush current limiter, it is important to insert it between the timer and the luminaire. The table below shows the maximum number of luminaires according to the installed circuit breaker. In each case without inrush current limiter, or with.
| Installed circuit breaker | EVO 3-xxx
without ESB |
EVO 4-XXX
without ESB |
EVO 5-XXX
without ESB |
EVO 6-XXX
without ESB |
EVO 3-xxx
with ESB |
EVO 4-XXX
with ESB |
EVO 5-XXX
with ESB |
EVO 6-XXX
with ESB |
| B13 | 4 | 4 | 4 | 4 | 13 | 10 | 8 | 6 |
| C13 | 4 | 4 | 4 | 4 | 13 | 10 | 8 | 6 |
| B16 | 7 | 7 | 7 | 7 | 16 | 12 | 10 | 8 |
| C16 | 7 | 7 | 7 | 7 | 16 | 12 | 10 | 8 |
For safety reasons, the installation must be carried out by trained specialist personnel.
Customers also bought
Power supply line Q-Serie Gen1 EU
AC connection cable for Q-Series Gen1 with EU plug.
€12,00 / Piece
Extension cable Q-Series Gen1
Extension cable to Q-Series Gen1 “Daisy Chain”, 37cm long
€12,00 / Piece
AC T Anschlussstecker Q-Serie Gen1
AC T connector plug for Q-Series Gen1 is required to connect 2 Q-Series Gen1 chandeliers in series and power them…
€4,80 / Piece
